Product Description

• Automatic Terminal Blocking System (ABS)

• The automatic Terminal blocking system prevents incorrect connection of the test leads and incorrect selection of the measured quantity

• This reduces danger to the user, the meter and the system to a remarkable extent

• Interface and Software RISH com 100

• The multimeters are fitted with a serial RS-232 C interface via which the measured values can be transmitted to a PC

• These values, electrically isolated, are transmitted to the attachable interface adaptor with infrared light through the case

• MIN/MAX Value Storage

• In addition to the display of the actual measured value, the minimum or maximum value can constantly be updated and stored

• Indication Of Negative Values On The Analog Scale

• When measuring DC quantities, also negative values are shown on the analog scale so that variations of the measured value can be observed at the zero point

• The measuring principle employed permits the measurement of the root-mean-square value (TRMS) of AC quantities and mixed quantities (AC and DC) regardless of the waveform

• Automatic Data Hold

• The DATA HOLD function makes it possible to hold the digitally displayed measured value

• According to a patented method, it is ensured that no freak value but the actual measured value is held in the case of rapid changes in measured quantities

• The held measured value appears on the digital display

• The actual measured value continues to be shown on the analog scale

• Auto-Ranging / Manual Range Selection

• The measured values are selected with rotary switch

• The measuring range is automatically matched to the measured value. The measuring range can also be selected manually via the AUTO/MAN push button

• Continuity Test

• This permits testing for short circuit and open circuit. In addition to the display, a facility of sound signal is available

• Temperature Measurement

• It is possible to use all models of RISH multi series, in direct connection of temperature sensor Pt 100 / Pt 1000

• The meters automatically detects the type of sensors connected to it & displays directly measured temperature

• Signaling In The Case Of A Blown Fuse

• The display FUSE points to a blown fuse

• Power Economizing Circuit

• The meter disconnects automatically when the measured value remains unchanged for about 10 minutes and no operating control was operated during this time

• The disconnection facility can be disabled

• Overload Warning

• A sound signal indication violation of the overload limits

• Protective Holster For Rough Duty

• A holster of soft rubber with tilt stand protects the meter against damage in the case of shock and drop

• The rubber material makes for the meter to stand firmly even on vibrating surface

Product Specification

Brand	Rishabh
Product Type	Digital Multimeter
Product Model	RISH Multi 14S
Display	3¾ digit
Counts	3100
Ac Voltage Range	0 to 1000V
AC Voltage Accuracy	±0.75 +2
Dc Voltage Range	30mV - 1000 V
DC Voltage Accuracy	±0.35 +1
Ac Current Range	300 µA - 10 A
AC Current Accuracy	±1.0 +2
DC Current Accuracy	±1.0 +2
Dc Current Range (amp)	300 µA - 10 A
Sensing	True RMS
Resistance Range (Ohm)	0-30 MΩ
Resistance Accuracy	±0.6 +1
Capacitance Range (F)	30nF - 30 µF
Capacitance Accuracy	±1.0 +3
Frequency Range (Hz)	0-100 KHz
Frequency Accuracy	±0.5 +1
Temperature Range(C)	0° - 850°C
Temperature Accuracy	±1.0 +1
Operating Temperature	-10° to 50°C
Storage Temperature	-25° to 70°C
Altitude	2000 m
Power Output	9 V Battery
Dimensions	84x195x35 mm
Weight (g)	Approx. 0.35 Kg with battery
Warranty	As Per Manufacturer Terms And Conditions